Promo code SPRING2022 will be automatically applied at checkout!

Wearing a CGM —
Where Does it Go?

Once you’ve gotten a CGM, you’ll need to know where and how to apply it correctly.

A CGM is a small sensor that tracks your glucose levels. With a continuous glucose monitor, you have the benefit of being able to view your glucose responses to food, stress, exercise, sleeping habits, and other daily activities as they occur.

So, where is the best place to wear a CGM? Most CGMs have only been approved for use on the back part of the arm, though some sensors may be suitable for placement on the legs, stomach, or other locations on the body. Be sure to check with your CGM provider for application instructions.

If you’re wondering how to wear a continuous glucose monitor, it’s as easy as this:

1. Align the applicator on the back of your arm
2. Push to apply the sensor
3. Cover your device with a protective patch

Setting Up and

Installing a CGM Device

Continuous glucose monitor installation is a lot easier than it seems, but there are a few tips to keep in mind to ensure the sensor stays put. Here’s how to apply your CGM for the first time:

01 — 04

Attaching a CGM

Start by choosing the portion of the back of your arm with the most fat and follow the steps below:

  • Clean the back of your arm with the alcohol wipe.
  • Peel the plastic layer off the sensor pack.
  • Twist the sensor applicator so it is undone.
  • Line up the dark marks on the applicator and the pack.
  • Connect both pieces and push down on a hard surface until you hear a click.
02 — 04

Installing the Sensor

In the gray applicator, the small needle should now be visible. Place the applicator over the back of your arm and push down firmly to apply the sensor. The sensor should attach itself to your arm.

You can then discard the applicator and cover the sensor with an adhesive bandage or patch. This is strongly encouraged to protect the sensor during use.

03 — 04

Connecting a Device

To connect your sensor, begin by downloading your companion app. While the exact steps may differ depending on your device and app, it may go something like this:

  • Select "Settings" from the menu in your app.
  • Select "Sensor" from the settings menu.
  • Click "Activate New Sensor."
  • Once you see the prompt "Ready to Scan" (if your device needs scanning to activate), hold your smartphone near the CGM device until you feel a vibration.

Remember some CGMs can take up to an hour to appear activated inside your companion app.

04 — 04

Transmitting Data

Once you've activated your sensor, your data will sync via Bluetooth. You can see all your glucose data from your CGM in a companion app like the Nutrisense App.

Sensors will need to be replaced periodically, as specified by your CGM provider.

Read on for a few more details about wearing a continuous glucose monitor

Do CGM needles hurt?

For most people, applying a CGM hurts less than a finger prick. The applicator that comes with the device is spring-loaded and applies the sensor quickly and painlessly. After a day of wearing the device, most people forget that it is even there.

A man kept Nutrisense patch on top of CGM sensor found in his left upper hand.

What happens
if a CGM sensor falls off?

A CGM stays on for several days and cannot be reinserted if it falls off early. If your sensor falls off, contact your provider to learn more about replacement options.

Take care when doing activities such as exercise as it may be easier to accidentally bump your sensor.

It's best to wear a protective patch to assure the sensor does not fall off or get damaged.

What materials
are CGMs adhered with?

The CGM sensor has a tiny wire filament that is inserted just below the skin using a micro needle. The filament does not go past the fat layer in your arm, and is held in place by a protective glue-like seal around the sensor.

Wearing a CGM arm band or protective patch is recommended to avoid accidental dislodging of the device.

CGM App  &

Wearable Tech

Transmit data to your phone

Experiment with....eating windows, workout regimens, & macronutrient balance.
Nutrisense.... arms.... you with the tools to understand what makes your body tick and make changes that work for....you.

A CGM is a form of wearable tech that allows you to send your body's glucose data straight to your phone.

CGM App & Wearable Tech

As a Nutrisense member, you can sync your data from some other wearables or smart watches with the Nutrisense App. This can help you learn more about how stress, sleep, and exercise routines may affect glucose.

The following devices are compatible with the Nutrisense App:

  • Apple Watch
  • Samsung watches
  • Oura ring
  • Fitbit
  • Garmin devices
A logo for Apple Watch
A logo for Samsung Galaxy Watch Active
A logo for Oura Ring
A logo for FitBit
A logo for Garmin

The first self-guided, in-app learning program. It provides additional tools and support to help you learn more about glucose monitoring and how to use it to support your health journey.

In-app course:
In-Range

Your questions
answered.

Still have questions? Here are some answers to a few of the most frequently asked questions.

Can you wear a CGM for an X-Ray?
A curved arrow facing bottom

A CGM or glucose biosensor should not be worn during an X-ray or an MRI, as the radiation can damage the device or cause it to malfunction. Make sure to follow the continuous glucose monitor guidelines provided with your device. Consult with your doctor and let them know you are wearing a sensor before getting an X-ray.

Do CGMs Set Off Airport Security Systems?
A curved arrow facing bottom

If you're planning to travel by plane while wearing a CGM, let the TSA or the airport security agent know that you are wearing the device and request a manual check. CGMs are able to go through metal detectors but may malfunction if exposed to full-body scans or X-rays.

Does a CGM have a needle?
A curved arrow facing bottom

The CGM applicator that comes with your CGMs contains a small needle which is used to apply the device to the back of your arm. Once applied, a small filament attached to the sensor remains under your skin which allows the device to measure your glucose levels via interstitial fluid.

Does Installing a CGM Hurt?
A curved arrow facing bottom

You may have questions about how to apply a CGM sensor, including, "does a CGM hurt?" And the answer is no, it doesn't! Even though it may seem scary at first, the truth is that most people feel no pain when applying a sensor.

The applicator that comes with the device is spring-loaded and applies the sensor quickly and painlessly. Applying a CGM hurts less than a finger prick, and after a day of wearing the device, most people forget that it is even there.

How do you put on a CGM?
A curved arrow facing bottom

A CGM or glucose biosensor can be applied on the back of the arm and used to track glucose levels. If you’re not sure how to put on a continuous glucose monitor, don't worry! It’s a lot simpler than it may seem. Typically, you attach the sensor to the applicator, place it on the back of your arm, and push down to release the sensor and apply it to your arm, but always follow the exact provided directions for your CGM model. Continuous glucose monitor placement is the same on either arm. If you're wondering how to remove a CGM sensor once it expires, simply peel the adhesive off your arm slowly—just like if you were removing a bandage.

*Disclaimer: The Nutrisense program is not intended to diagnose, cure or prevent any conditions such as diabetes.